Thermis Home

Category

Thermal Imaging

15 articles

Loop by Loop: A Cold-Start Thermal Check for Wet Underfloor Heating

Loop by Loop: A Cold-Start Thermal Check for Wet Underfloor Heating

A wet underfloor heating system rarely announces an imbalance. It reveals one slowly, loop by loop, as the screed warms after a cold start. This guide explains how a thermal camera sequence, read alongside manifold flow rates and actuator behaviour, can turn a vague sense of uneven warmth into usable evidence.

The Ceiling's Weak Point: A Thermal Audit of the Loft Hatch

The Ceiling's Weak Point: A Thermal Audit of the Loft Hatch

A loft hatch is a small opening with a disproportionate role in winter heat loss. This thermal audit explains how to test the hatch, frame and ladder gap with a camera and smoke pen, then verify the improvement after sealing and insulating.

Cold Floors, Warm Desks: A Thermal Audit for the Garden Studio

Cold Floors, Warm Desks: A Thermal Audit for the Garden Studio

By mid-November, a garden office stops behaving like a spare room and starts behaving like a small detached building with its own weather. This practical thermal-camera walkthrough shows UK homeowners how to find the real weak points — floor bridging, single-glazed cold spots and hidden air paths — before buying another heater.

The Cold Crown of a Radiator: A Thermal Diagnosis Before the Bleed Key

The Cold Crown of a Radiator: A Thermal Diagnosis Before the Bleed Key

A radiator that is warm at the bottom and cool at the top is often assumed to need bleeding, but thermal images can show a different story. This guide explains how UK homeowners can read surface-temperature patterns safely, distinguish air from sludge, balancing and pump issues, and judge when an engineer should take over.

Before You Call the Glazier: A Dew-Point Diagnosis for Misty Windows

Before You Call the Glazier: A Dew-Point Diagnosis for Misty Windows

Condensation on internal glass is often treated as proof that replacement glazing is overdue. A simple dew-point test, using a hygrometer and a surface thermometer, can separate humidity problems from cold bridging and failed seals before any money is committed.

Reading the Stack: A November Thermal Survey of the Victorian Chimney Breast

Reading the Stack: A November Thermal Survey of the Victorian Chimney Breast

A disused flue is rarely inert. On a cold November evening, the chimney breast can behave as a permanent extract route for warmed air, and thermal imaging makes that path visible before the meter does. This guide sets out how to survey the stack from inside and out, measure the effect of a proper draught excluder, and recognise the point at which efficiency work must stop and Gas Safe work begins.

A Fair Frame: Building Deposit-Safe Thermal Evidence for UK Rented Homes

A Fair Frame: Building Deposit-Safe Thermal Evidence for UK Rented Homes

Thermal images can support a damp or cold complaint in a rented home, but only if they are repeatable, contextualised and fairly presented. This protocol sets out camera settings, reference shots, timestamps, moisture readings, privacy handling and a defensible written summary for tenants and landlords.

Draughts Before Devices: A Practical Airtightness Audit for UK Homes

Draughts Before Devices: A Practical Airtightness Audit for UK Homes

Draughts and uncontrolled air leakage are often overlooked in favour of insulation and connected heating controls. This practical UK guide covers smoke pencils, thermal cameras, humidity sensors and safe sealing work, with a ventilation strategy for Victorian terraces and new builds.